ASTM A325-10e1

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

ASTM International , 05/01/2010

Publisher: ASTM

File Format: PDF

$30.00$60.00

Description

1.1 This specification² covers two types of quenched and tempered steel heavy hex structural bolts having a minimum tensile strength of 120 ksi for sizes 1.0 in. and less and 105 ksi for sizes over 1.0 to 1¹/₂ in., inclusive.

1.2 The bolts are intended for use in structural connections. These connections are comparable to those covered under the requirements of the Specification for Structural Joints Using High-Strength Bolts, approved by the Research Council on Structural Connections; endorsed by the American Institute of Steel Construction and by the Industrial Fastener Institute.

1.3 The bolts are furnished in sizes ¹/₂ to 1¹/₂ in., inclusive. They are designated by type, denoting chemical composition as follows:

Type	Description
Type 1	Medium carbon, carbon boron, or medium carbon alloy steel.
Type 2	Withdrawn in November 1991.
Type 3	Weathering steel.

Note 1-Bolts for general applications, including anchor bolts, are covered by Specification A449. Also refer to Specification A449 for quenched and tempered steel bolts and studs with diameters greater than 1¹/₂ in. but with similar mechanical properties.

1.4 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

Note 2-A complete metric companion to Specification A325 has been developed, Specification A325M; therefore, no metric equivalents are presented in this specification.

1.5 This specification is applicable to heavy hex structural bolts only. For bolts of other configurations and thread lengths with similar mechanical properties, see Specification A449.

1.6 Terms used in this specification are defined in Terminology F1789.

1.7 The following safety hazard caveat pertains only to the test methods portion, Section 10, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Published: 05/01/2010

Pages: 8

File Size: 1 file , 130 KB

Language: English

Note: This product is unavailable in Russia, Ukraine, Belarus

ASTM A325-10e1

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

ASTM A325-10e1 History

ASTM F3125/F3125M-23

ASTM F3125/F3125M-22

ASTM F3125/F3125M-21

ASTM F3125/F3125M-19

ASTM F3125/F3125M-18

ASTM F3125-15

ASTM F3125/F3125M-15a

ASTM F2280-14

ASTM A490M-14

ASTM F1852-14

ASTM A490-14

ASTM A325-14

ASTM A325M-13

ASTM A490M-12

ASTM F2280-12

ASTM A490M-11

ASTM F2280-11

ASTM A490-11

ASTM A490-10ae1

ASTM A490M-10

ASTM A490-10a

ASTM A490-10

ASTM A325-10e1

ASTM A325M-09

ASTM A490-09

ASTM A325-09

ASTM A325-09ae1

ASTM A490M-09a

ASTM A490M-09

ASTM F1852-08

ASTM A490-08b

ASTM A325M-08

More Standards PDF

ASTM F3005-14a

ASTM F381-14

ASTM D7975-14

ASTM F2415-14