ASTM A456/A456M-08(2013)

Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings

ASTM International , 04/01/2013

Publisher: ASTM

File Format: PDF

$30.00$60.00

Description

1.1This is an acceptance specification for the magnetic particle inspection of forged steel crankshafts having main bearing journals or crankpins 4 in. [200 mm] or larger in diameter.

1.2There are three classes, with acceptance standards of increasing severity:

1.2.1Class 1.

1.2.2Class 2 (originally the sole acceptance standard of this specification).

1.2.3Class 3 (formerly covered in Supplementary Requirement S1 of Specification A456 - 64 (1970)).

1.3This specification is not intended to cover continuous grain flow crankshafts (see Specification A983/A983M); however, Specification A986/A986M may be used for this purpose.

Note 1-Specification A668/A668M is a product specification which may be used for slab-forged crankshaft forgings that are usually twisted in order to set the crankpin angles, or for barrel forged crankshafts where the crankpins are machined in the appropriate configuration from a cylindrical forging.

1.4The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.5Unless the order specifies the applicable “M” specification designation, the material shall be furnished to the inch units.

Published: 04/01/2013

Pages: 5

File Size: 1 file , 100 KB

Language: English

Note: This product is unavailable in Russia, Ukraine, Belarus