This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing.
These extrusions have been used typically for structural parts requiring high strength up to 500 \mDF (260 \mDC) after proper precipitation heat treatment, but usage is not limited to such applications and which may require welding during fabrication.
Certain design and fabricating procedures may cause material in the specified condition to be susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
These extrusions have been used typically for structural parts requiring high strength up to 500 \mDF (260 \mDC) after proper precipitation heat treatment, but usage is not limited to such applications and which may require welding during fabrication.
Certain design and fabricating procedures may cause material in the specified condition to be susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
SAE AMS4163E History
More Standards PDF
SAE EIA358C
$37.00 $74.00
SAE AMS3892/6B
$28.00 $57.00
SAE AS85049/3B
$43.00 $87.00
SAE J2873_201603
$28.00 $57.00