This specification covers a corrosion-resistant steel in the form of sheet and strip 0.0015 to 0.100 inch (0.038 to 2.54 mm) in nominal thickness.
These products have been used typically for parts such as springs requiring corrosion resistance and high strength up to 600 \mDF (316 \mDC), but usage is not limited to such applications.
Strength of these cold-worked products will be impaired if parts require welding during fabrication.
Certain design and processing procedures may causes these products to become subject to stress-corrosion cracking; SAE ARP 1110 recommends practices to minimize such conditions.
These products have been used typically for parts such as springs requiring corrosion resistance and high strength up to 600 \mDF (316 \mDC), but usage is not limited to such applications.
Strength of these cold-worked products will be impaired if parts require welding during fabrication.
Certain design and processing procedures may causes these products to become subject to stress-corrosion cracking; SAE ARP 1110 recommends practices to minimize such conditions.
SAE AMS5529J History
SAE AMS5529L
$34.00 $69.00
SAE AMS5529K
$34.00 $69.00
SAE AMS5529J
$28.00 $56.00
SAE AMS5529H
$28.00 $56.00
More Standards PDF
SAE AS22520/21A
$39.00 $79.00
SAE J3144_201904
$24.00 $49.00
SAE AIR81E
$45.00 $91.00
SAE ARP6338A
$50.00 $101.00