This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
These products have been used typically for parts, 3.5 inches (89 mm) and under in nominal section thickness, requiring a through-hardening steel capable of developing a minimum hardness of 53 HRC, the parts being subject to very rigid magnetic particle inspection standards, but usage is not limited to such applications. Except for carbon content and tensile properties this material is similar to AMS 6417.
Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; ARP 1110 recommends practices to minimize such conditions.
These products have been used typically for parts, 3.5 inches (89 mm) and under in nominal section thickness, requiring a through-hardening steel capable of developing a minimum hardness of 53 HRC, the parts being subject to very rigid magnetic particle inspection standards, but usage is not limited to such applications. Except for carbon content and tensile properties this material is similar to AMS 6417.
Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; ARP 1110 recommends practices to minimize such conditions.
SAE AMS6419G History
SAE AMS6419K
$43.00 $87.00
SAE AMS6419J
$39.00 $78.00
SAE AMS6419H
$37.00 $74.00
SAE AMS6419G
$37.00 $74.00
More Standards PDF
SAE AS1895/22G
$28.00 $57.00
SAE J2412_202402
$50.00 $101.00
SAE J1930_202408
$41.00 $83.00
SAE AS4792C
$28.00 $57.00