This specification covers a perfluoroether elastomer in the form of molded rings.
These rings have been used typically as static sealing rings and molded in place gaskets at temperatures between -65 and +400 \mDF (-54 and +203 \mDC). The cross-section of such rings is usually not over 0.275 inch (6.98 mm) in diameter or thickness. The material has resistance to a variety of fuels, engine oils, hydraulic oil, and hydraulic fluid, but usage is not limited to such applications. Each application should be considered individually.
These rings have been used typically as static sealing rings and molded in place gaskets at temperatures between -65 and +400 \mDF (-54 and +203 \mDC). The cross-section of such rings is usually not over 0.275 inch (6.98 mm) in diameter or thickness. The material has resistance to a variety of fuels, engine oils, hydraulic oil, and hydraulic fluid, but usage is not limited to such applications. Each application should be considered individually.
SAE AMS7254A History
SAE AMS7254B
$39.00 $79.00
SAE AMS7254A
$33.00 $66.00
More Standards PDF
SAE AS4692F
$34.00 $69.00
SAE AMS3050/5
$20.00 $41.00
SAE AMS5647K
$33.00 $66.00
SAE AMS4207C
$31.00 $63.00